Rebel Wire harnesses are all assembled in America from American made components. We use only heavy duty SXL wire and label each one every 6" then bundle them for easy installation. Each kit comes with easy to follow instructions and tech line information. Our kits are great for everything from the basic traditional hot rod or custom to highly optioned street rods. Order yours today.
|
 | 8 Circuit Wiring Harnesses
Our 8 circuit wiring harness is perfect for Traditional Hot Rods, T-Buckets, Customs, or Race Car applications that require only basic circuits. Assembled in America from American made components, the heavy duty SXL wire is labeled every 6" and bundled for easy installation. This kit has 8 circuits for lights, gauges, radio, and motor. Kit comes with easy to use instructions for Chevy, Ford, or Mopar installations, dash light wire, neutral safety switch wire, fusible link, 1 1/4" rubber grommet for the firewall, and fuse block label.
|
8 Circuit Rear Mount Wiring Harness
Same as our original 8 circuit harness but with enough wire to mount the fuse block in the trunk, or behind the seat.
|
|
 |
8 Circuit 6 VOLT Universal Wire Harness
The 8 circuit, 6 volt kit has all the circuits needed to wire horn, headlights, stop light, heater, radio, gauge power, turn signal and wipers. This kit is made from SXL wire, all sized for 6 Volts, labeled every 6" and bundled like all REBEL WIRE kits. The turn signal flasher is installed in the fuse panel, with the horn relay separate, and also includes seperate terminal block and terminals for 10 and 12 guage wire, 1 1/4" grommet for the firewall, fuse block label, and complete instruction book for easy installation. This harness wires car or truck from front to rear.
|
|
 | 9+3 Circuit Wiring Harnesses
Our 9+3 circuit wiring harnesses are perfect for Hot Rod, Street Rod or Custom applications that require a few more circuits. Assembled by hand in our shop in Tennessee from American made components, the flame proof, heavy duty SXL wire is labeled every 6" and bundled for easy installation. This kit has 9 circuits for lights, gauges, radio, heater, and motor, plus 3 open circuits for whatever you might want to add such as power windows or doors, electric fan, A/C etc. Kit comes with easy to use instructions for Chevy, Ford, or Mopar installations, dash light wire, neutral safety switch wire, fusible link, 1 1/4" rubber grommet for the firewall, 3 fuse block terminals, and fuse block label.
|
9+3 Circuit Rear Mount Wiring Harness
Same as our original 9+3 circuit harness but with enough wire to mount the fuse block in the trunk, or behind the seat.
|
|
 |
14 Circuit Wiring Harness
The Rebel Wire 14 circuit wiring harness gives you a great mid-range kit at an affordable price. This kit has circuits for lights, gauges, radio, ac-heat, wipers, turn signals, 4-way hazard flashers, horn, power windows, electric fan, and cell phone charger. As with all our great kits, the 14 circuit is made with flame proof, heavy duty SXL wire, labeled every 6" and bundled for easy installation. Kit comes with easy to follow instruction book, dash light wire, neutral safety switch wire, fusible link, 1 1/4" grommet and fuse block label.
|
|
 |
20 Circuit Wiring Harnesses
Our 20 circuit wiring harnesses are perfect for the highly optioned street rod or custom. Assembled in America from American made components, the heavy duty SXL wire is labeled every 6" and bundled for easy installation. Circuits are provided for all the basics, (lights, gauges, radio, and motor), plus AC, power windows and doors, electric fan, electric fuel pump, trunk light, dome light, electric choke, radio constant, cruise, backup lights, tach, and third brake light. Kit comes with easy to use instructions for Chevy, Ford, or Mopar installations, dash light wire, neutral safety switch wire, fusible link, 1 1/4" rubber grommet for the firewall, bypass wire for 80 amp or higher alternator, and fuse block label.
|
20 Circuit Rear Mount Wiring Harness
Same as the 20 circuit universal harness, but with enough wire to mount theÊfuse block in the trunk or behind the seat.
|
|
 |
20 Circuit EFI Compatible Wiring Harness
This kit is designed to be used with any stand alone EFI engine harness. Circuits included: horn relay, headlight power, brake light switch, radio, radio constant, power door, power window, truck light, dome light, hazzard, cell phone charge, gauge power, electric fan, cruise power, backup lights, ac heater, turn signal, wiper, coil and one accessory. All wire is heavy duty SXL and labeled every 6".
EFI ENGINE HARNESS NOT INCLUDED WITH THIS KIT
|
